Increase horsepower and style under your hood. The PERRIN Cold Air Intake (CAI) system uses proper MAF alignment and tubing size, which are crucial for maintaining safe air-fuel ratios and preventing knock and check engine lights that plague competitors.
The number one reason to buy an intake is to add more power to your car. The PERRIN Cold Air Intake adds 10-18 wheel horsepower and 10-20 ft lbs of torque to your car without adding any check engine lights or other issues.
This part is designed and tested to work safely on your vehicle without any ECU recalibrating required. Also, this intake has been thoroughly tested to be safe on all Cobb AccessPORT Off-The-Shelf (OTS) calibrations/tunes. If you are/will-be-using a custom ECU calibration provided by a custom tuner, seek their advice if this intake is safe to use with their calibration. Contact Tech@PERRIN.com for more info.
PERRIN Intake systems use proper MAF alignment and plumbing size, both of which are crucial to maintaining proper air-fuel ratios and preventing check engine lights that plague competitors. Eliminating intake restrictions and increasing flow potential allows for faster turbo spooling, reduces turbo lag, and broadens the power band.
The PERRIN Cold Air Intake for 2015-2020 WRX comes with a heat shield to redirect hot engine air away from the intake to allow for near ambient air intake temperatures.
Dryflow filters provide the same level of protection as an oiled filter, but require less maintenance, are less of a mess, and have no risk of over-oiling. The rigid screen inside and around the filter media helps in preventing damage from debris and is ideal for dusty and rough driving conditions.
K&N Synthetic outdoor air filter cleaning how to video
The OEM MAF sensor wiring harness is too short to work with the PERRIN Cold Air Intake. Provided with each kit is a MAF sensor extension. This extension comes with OEM plug ends to relocate the MAF sensor with no compatibility issues.
Powder coated for protection against the elements, the finish will look awesome for years to come. The PERRIN WRX Cold Air Intake is available in black, red, neon yellow, or pink powder coating.
During normal driving, the PERRIN intake sounds relatively stock. However, under load it really comes to life, unlocking the sound of your turbo flat-4. Once installed, the sound of your blow off valve will be much more prominent, demanding attention and alerting people that your car is undeniably modified.
This intake system requires no tuning to operate properly and safely! However, if you choose to add an upgraded downpipe or tune, you must choose a tune that is specific to either the PERRIN or AEM Intake System. MAF curves for any other intake (including the OEM Air Box) will not work properly and you will damage your engine! Always contact a qualified tuner prior to adding any ECU mapping to your vehicle! If your tuner requests a MAF Curve, we do have those available upon request. Questions?: Please contact tech@PERRIN.com.
PERRIN Performance warrants to the original purchaser that all PERRIN products will be free from defects in material and workmanship within a sixty (60) month period from the date of purchase. *Some exclusions apply
WARNING: Cancer and Reproductive Harm
This product is legal in California only for racing vehicles which may never be used upon a highway. Check your local and federal laws prior to installation.
Thank you for signing up.